ACR Electronics Y1-03-0233 Marine GPS System User Manual


 
Y1-03-0233 Rev. D 12
Category I beacons-Automatic deployment and activation
If the vessel sinks, the HydroFix™ HRU frees the beacon from the bracket,
allowing it to float to the surface. Built-in sensors detect that the beacon is no
longer in its bracket and when continuity is created by water between two of
the top cap screws, an activation circuit is completed.
NOTE: Transmission of the 121.5 MHz and 406 MHz signals will not occur
until 100 seconds after activation.
HRU releases the rod
separating the front and
back cover of bracket at a
depth between 4-13 feet
Ejector Spring
launches EPIRB
from the bracket
allowing it to float
freely to the water
surface