Behringer CD400 SONAR User Manual


 
CHORUS SPACE-D CD400
Digital 3-Dimensional Sound Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER CHORUS SPACE-D CD400.
This ultimate eects pedal is designed to suit almost any application you can think of. Add a breathtaking
third dimension to your sound or instrument and experience the secret weapon of professional
recording studios.
The chorus eect adds a shifting detuned signal to the original, similar to playing in unison in a
group of instruments, and it is often used for dispersing sounds.
1. Controls
(1) The LEVEL control adjusts the eect sound level.
(2) The EQ control allows you to shape your overall eect sound. Turning it to the right
will emphasize high frequencies while turning to the the left will cut them.
(3) The RATE control determines the chorus eect speed.
(4) Turn up the DEPTH control to achieve a fuller and deeper eect sound.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS IN connector to plug in the instrument cable.
(8) The two ¼" TS OUT A and OUT B connectors send the signal to your amp. Use both connectors if
you want to achieve full stereo chorus eect. For mono use plug in OUT A only.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
(1)
(4)
(7)
(6)
(8)
(5)
(2) (3)