Filter
Top Products
7
OPERATION
ESP FUNCTION
The unit can be shockproof about ten
seconds.
REMOTE SENSOR
Point the remote control handset to the
remote sensor (3). Press the function keys
on the handset to control the system.
RESET FUNCTION
Reset button (25) must be activated with
either a ballpoint pen or thin metal object.
The reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
POWER-DOWN MEMORY FUNCTION
The unit has the power-down memory
function; some data will never lose even
when power's off. You can press the
numerical button 1 (18) and MOD button (9)
together to clear the power-down memory
function.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button (9) shortly to select
radio mode, the radio mode appears in the
display together with the memory band and
frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU/ENT
button (5) shortly to select the desired
band.
The reception band will change in the
following order:
→ FM1 → FM2 → FM3 → AM (MW)
SELECTING STATION
Press the button (22) or button
(19) shortly to activate automatic seek
function. Press for several seconds until
“MANUAL” appears on the display, the
manual tuning mode is selected. If both
buttons have not been pressed for several
seconds, it will return to seek tuning mode
and “AUTO” appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (6) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding
preset number button.
- Program scanning
Press AS/PS button (6) shortly to scan
preset station. When the field strength
level is more than the threshold level of
stop level, the radio is holding at that
preset number for several seconds with
release mute, then searches again.
STATION STORING
Press any one of the preset buttons (14) (1
to 6) to select a station, which had been
stored in the memory. Press this button for
several seconds to store the current station
into the number button.
RBDS OPERATION
¾ In FM mode, press TA button (11), the
unit will search Traffic Announcement
automatically. When received a Traffic
Announcement station, the unit will
change to the Traffic Announcement
station automatically. Press TA button
(11) again will exit TA mode.
¾ USE PTY BUTTON (8)
Press PTY button (8) to enter PTY
SELECT menu. In the menu, use the
VOL+/- buttons (23&20) or use the
preset buttons (14) (1 to 6) to select the
items.