Cisco Systems 1700 Outboard Motor User Manual


 
B-3
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Appendix B ROM Monitor
ROM Monitor Commands
ROM Monitor Commands
Enter ? or help at the ROM monitor prompt to display a list of available
commands and options, as follows:
rommon 1 > ?
alias set and display aliases command
boot boot up an external process
break set/show/clear the breakpoint
confreg configuration register utility
cont continue executing a downloaded image
context display the context of a loaded image
cookie display contents of cookie PROM in hex
dev list the device table
dir list files in file system
dis display instruction stream
dnld serial download a program module
frame print out a selected stack frame
help monitor builtin command help
history monitor command history
meminfo main memory information
repeat repeat a monitor command
reset system reset
set display the monitor variables
stack produce a stack trace
sync write monitor environment to NVRAM
sysret print out info from last system return
tftpdnld tftp image download
unalias unset an alias
unset unset a monitor variable
xmodem x/ymodem image download
Commands are case sensitive. You can halt any command by pressing the Break
key on a terminal. If you are using a PC, most terminal emulation programs halt
a command when you press the Ctrl and the Break keys at the same time. If you
are using another type of terminal emulator or terminal emulation software, refer
to the documentation for that product for information on how to send a Break
command.