Filter
Top Products
B-2
Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter Hardware Installation Guide
OL-12192-01
Appendix B Connector and Cable Specifications
Cable and Adapter Specifications
10-Gigabit Ethernet Module Interface
The 10-Gigabit Ethernet optical modules use SC connectors or Infiniband 4x connectors, as shown in
Figure B-2 and Figure B-3.
Figure B-2 10-Gigabit Ethernet Optical Module SC Connector
Figure B-3 10-Gigabit Ethernet Infiniband 4x Connector
Console Port
The console port uses a USB connector. The supplied USB-to-DB-9 adapter cable is used to connect the
console port of the switch module to a PC.
Cable and Adapter Specifications
These sections describe the cables and adapters used with the switch module:
• 10-Gigabit Ethernet X2 Transceiver Module Cable Specifications, page B-3
• Four Twisted-Pair Cable Pinouts, page B-4
• Two Twisted-Pair Cable Pinouts, page B-5
• Identifying a Crossover Cable, page B-5
H8707
Tx Rx