Filter
Top Products
4-1
INITIALIZATION AND ADJUSTMENT
The display unit RDP-120 can be used as a sub display. If the sub display is installed, set
heading alignment, sweep timing, video signal level, antenna height and STC slope for
each display unit.
4.1 Tuning
1. Press the [MENU] key.
2. Press the [0] key twice to select OTHER.
Figure 4-1 OTHER menu
3. Press the [7] key twice followed by the [ENTER/SELECT] key to tune. “AUTO TUNE”
appears on the screen while the radar is tuning and goes off when tuning is com-
pleted. (This procedure records both peak voltage and fine automatic tuning for the
injector display.)