Filter
Top Products
59
Problem Solution
iPod
Why does my FUSION
Head unit keep locking
up when connected to
my iPod/iPhone?
If you are experiencing software lock-ups or your unit freezes:
• Reset the Head unit by pressing the reset button inside
the face plate.
• Reset your iPod/iPhone (see Apple website from model-
specifi c information). This should resume normal operation.
• Make sure you have the latest version of iTunes and the lat-
est operating software in your iPod/iPhone. It is important
to update software when Apple releases new versions. If you
are connected via a dock, ensure you are using the correct
sleeve and the connection to the Head unit is secure.
Will my iPod/iPhone
connect to my FUSION
product if the battery
is fl at?
No. It will take a number of minutes for the Apple product to get a
minimum level of charge before it can connect and become opera-
tional. Please connect and wait for the unit to initialise.
My iPod/iPhone will
not connect to the
Head unit while in the
dock.
If your Head unit displays “Not Connected” while using iPod as
input source:
• Check that you are using the correct sleeve combination. If
you have the incorrect sleeve combination this could prevent
the iPod connector from mating correctly. It could also dam-
age the connector in the dock or your iPod/iPhone itself.
If you are uncertain which iPod model you have, go to
http://www.apple.com/support/ to get the correct model
information for your iPod and sleeve.
If you are still unable to connect once you know for certain
you have the correct iPod/iPhone–sleeve combination:
• Ensure that you have the latest version of operating soft-
ware installed in your iPod/iPhone and the latest iTunes
version. To do this, connect your iPod/iPhone to iTunes and
it will check and, if necessary, prompt you to download the
latest version.
If you are still unable to connect once you have confi rmed
that you have the latest software or you have updated your
iPod/iPhone:
• Reset the iPod/iPhone (see the user manual for your Apple
product) and also reset the Head unit (see FUSION user
manual).
If you are still unable to connect:
• Contact your FUSION dealer or contact FUSION via the
tech email on the FUSION website.
My Apple Device has
gone into thermal
protection
Caution: The internal dock temperature of the MS-IP700 will be
slightly higher than the ambient temperature outside the head
unit. Should your Apple iPhone or iTouch shut down due to exceed-
ing the operating temperature please carefully remove it from the
MS-IP700 and allow it to cool down before using again. Using your
Apple device in a low charged state will increase the heat generated
whilst it is charging. For more information relating to this please
follow the Apple support web site link below.
http://support.apple.com/kb/ht2101
12
DISPLAYING THE CLOCK
Use the Clock key to display the current time. If the time is incorrect, see
“Clock Setting” on page 48.
Note: The current time is also displayed in the title bar of each
input source screen.
Clock
• Press the Clock key to display the current time
4. Turn the Encoder to left or right to adjust the Bass level, if required.
5. Press the Encoder to highlight each tone control, and adjust as required.
When you press the Encoder on the Treble tone control, the Sub level
screen is displayed again.
6. Press any key to exit