Fusion MS-AV700 Marine GPS System User Manual


 
49
5. If required, press the Encoder to move to the AM/PM fi eld (displayed in 12
hour clock mode only. See Step 7 below). Turn the Encoder to change the
AM/PM setting.
6. Press the Encoder to save the time and exit (the time out feature does not
operate here).
7. If you want to use the 24 hour clock display (13:09 rather than 1:09 pm,
for example), make sure the 24 hour checkbox is selected ( ). See
Steps 2–3 below.
8. Press the Menu key (or leave to time out) to save the current setting and exit.
To select 12 or 24 hour clock display mode:
1. Press the Menu key.
2. Turn and then press the Encoder to select Settings > Clock > 24 hour.
3. Press the Encoder to select the 24 hour clock display (13:09 rather than
1:09 pm, for example) ( )
4. Press any key to exit
SIRIUS XM RADIO
The 700 Series is ready to connect to a Sirius XM radio receiver (USA only).
The Sirius XM tuner is an optional extra that must be purchased separately.
Sirius XM Tuner Model SVX100 is required.
Activating your Sirius XM tuner
You must activate the Sirius XM tuner before you can begin to receive the
Sirius XM Radio Service.
In order to activate your radio subscription, you will need the Sirius XM ID
(SXID) which uniquely identifi es your tuner. The 12 digit SXID is displayed on
the LCD on initialization. MS-IP700 and MS-AV700 will display the SXID on
Channel 0.
Power on your system and make sure that you are receiving good signal, you
are able to hear audio on the Sirius XM Preview channel (Ch-184)
Note: Have your credit card handy and contact Sirius XM on the
Internet at https://care.siriusxm.com/ and follow the prompts to
activate your subscription. You can also call Sirius XM toll-free
at 1-866-635-2349. Once activated, you will be able to begin
enjoying Sirius XM Radio’s digital entertainment and can tune to
other channels.
22
Controlling Playback
You can control iPod playback with the Play / Pause, Forward and Rewind
keys. The selected track starts playing automatically.
If you want to: Use: Notes:
Play / Pause a
track
Play / Pause
Press the key to pause the current track. The
pause icon ( ) is displayed top right in the
input source screen.
Press the key again to resume play. The play
( ) icon is displayed in the input source screen.
Skip to next
track
Forward
Press the key to skip to the start of the
next track.
Rewind
Press the key to skip to the start of the current
track.
Press the key twice to skip to the start of the
previous track.
Fast forward /
rewind
Forward, or
Rewind
Press and hold down the key to fast forward (or
Rewind) the playback. The fast forward ( )
(or Rewind) icon is displayed in the input source
screen.