Fusion MS-AV700 Marine GPS System User Manual


 
25
USB SOURCE SCREEN
An example of a typical USB fl ash drive input source screen is shown in
Figure 5 below.
CONTROLLING USB FLASH DRIVE PLAYBACK
Selecting audio tracks from USB fl ash drive
You can store audio tracks (MP3 format only) on a USB fl ash drive for
playback on the 700 Series. Audio tracks can be stored in folders on the
ash drive and selected for playback, as required. The fl ash drive must be
formatted to FAT32 or NTFS format (these are the most commonly used
ash drive format).
For example, to select a Folder then track.:
Play status indicator
Playback mode
indicator:
Shuffl e Repeat
(if active)
Track Duration
Progress bar
Figure 5 – Example USB fl ash drive source screen
Current track
details
Current time
Current track
number out of total
number in folder
Elapsed time
Press
Menu key
If your fl ash drive
has not been
named, the default
name is disk.
Press Encoder to
select KINGSTON.
Files and folders on
the fl ash drive are
displayed.
Turn Rotary
Encoder to scroll
the highlight.
Press Encoder to:
• select Folder
then track for
playback.
Menu
exit. See
“Menu Key
Operation”
on page 6.
46
To connect your iPod or USB fl ash drive to the 700 Series via a
MS-DKIPUSB dock:
1. Press the door catch and open the door of the dock.
2. Insert your USB fl ash drive into the USB connector or insert your iPod
in its correct sleeve. Make sure that the device is fi rmly pushed onto the
connector socket.
3. Close the door fi rmly.
4. Select input from the device, as required.
To connect your iPod to the 700 Series via an Apple Sync cable
(AV700 only):
1. Plug the USB plug of your Sync Cable into the USB socket of the external
USB cable on the MS-AV700.
2. Connect your iPod or iPhone to the 30-pin Connector of your Apple Sync Cable.
3. Select input from the device, as required.
Portable media device dock
(MS-DKIPUSB)