Filter
Top Products
17
Tuning
Method
Applies
to…
When tuning with this method…
Manual All bands • Press the Forward or Backward key to step through
the range of frequencies or channels one at a time.
• Press and hold down the key for rapid scanning of
frequencies or channels.
Manual SiriusXM • Press the Forward or Backward key to step through
all channels one at a time.
Category SiriusXM • Press the Play / Pause, Forward or Backward key to
step through the channels in the selected category.
• Only available when a category is selected in the
Category menu item. For further details see
“Category” on page 51.
Auto AM/FM • Press the Forward or Backward key to start
searching for available stations.
• Press the Play / Pause, Forward or Backward key to
stop the search.
Scan VHF • Scans through preset channels, pausing on a
channel while it is transmitting.
• Only available if there are two or more presets
saved.
• If there is any background noise, the scan will stop.
For further details see “Minimizing background
noise” on page 19.
• Press the Play / Pause, Forward or Backward key to
turn scan mode off. For further details see “Turning
scan mode on” on page 19.
NOTE: The Scan function is activated from the
settings menu, see ‘Setting up VHF’
Preset All bands • Press the Forward or Backward key to step through
available presets.
• Only available if there are two or more presets
saved.
• To tune to a specifi c preset:
a. Press the Menu key, and then press the
Encoder to select Presets.
b. Turn the Encoder to highlight the required
preset.
c. Press the Encoder to tune to the highlighted
preset.
For further details, see “Adding and Removing Presets”
on page 18.
54
2. (if required) turn and then press the Encoder to select Parental > Unlock.
Enter your access code.
3. Select the Lock/Unlock menu item.
4. Turn the Encoder to highlight a channel then press the Encoder to
lock ( ) or unlock ( ) the channel, as required.
5. Press the Menu key (or leave to time out) to exit.
Channel Skipping
Channel skipping gives the user the ability to set a channel to be skipped /
missed while navigating via the Forward and Back key in the Sirius Source
Screen. The user still able to navigate to a skipped channel via the channel list
found in the menu.
To set or unset a channel from being skipped:
1. Press the Menu key.
2. (if required) turn and then press the Encoder to select Parental > Unlock.
Enter your access code.
3. Select the Skip/UnSkip menu item.
4. Turn the Encoder to highlight a channel then press the Encoder to turn on
( ) or turn off ( ) skip, as required.
5. Press the Menu key (or leave to time out) to exit.
ADVANCED SETTINGS
The settings described in this section are usually set up when the unit is
installed and not changed again.
Sub fi lter
Use the sub fi lter setting to control the sub-woofer cutoff frequency. Audio
signals above the selected frequency will not be passed on to the sub-woofer.
The sub fi lter settings apply to all sub-woofer outputs.
Menu key Rotary
Encoder