Fusion MS-IP700 Marine GPS System User Manual


 
51
Category
You can use the Category menu item to control which categories of
channels are available (Rock, for example) when you are using the Category
tuning method (see “Tuning Methods” on page 16.
To select a Category:
1. Press the Menu key.
2. Turn and then press the Encoder to select Category.
3. Do one of the following:
To enable the Category Tuning method, turn and then press the Encoder
to select the required category name, “Rock” for example:
The Sirius Source Screen is displayed with the
Tuning mode indicator set to ‘Category’.
Special icons
When you select a channel in the channels list you may see two
different icons at the right hand side of the list.
The padlock icon means the channel is locked or considered
mature content. If you select this channel you will be asked to
unlock parent mode, if it is not already unlocked.
The green arrow icon means the channel has been setup to be
skipped when using the Forward and Backward keys in the Sirius
Source Screen. However, you can always access a skipped
channel via this channel list.
20
PLAYING CONTENT
Before you can use your iPod as an input source you must fi rst connect the
device to the 700 Series. For further details, see “Preparing for iPod or USB
Input” on page 43.
To listen to input from your iPod:
iPod SOURCE SCREEN
An example of a typical iPod input source screen is shown in Figure 4 below.
iPod
MS-IP700
iPod
Press the iPod key. The iPod input source screen is displayed.
The most recently selected track starts playing at the
current play point.
MS-AV700
Auxiliary
Press the Auxiliary key. Keep pressing the key until the iPod
source screen is displayed.
Playback status
indicator:
Play or Pause
Playback mode
indicator:
Shuffl e Repeat
(if active)
Track Duration
Progress bar
Current track number out
of total number in playlist
Figure 4 – Example iPod input source screen
Current track
details and
artwork
(if available)
Current time
Elapsed time