Filter
Top Products
27
CHANGING USB FLASH DRIVE SETTINGS
To change a highlighted setting in the USB settings menu:
1. Press the Encoder to toggle the value on or off.
Repeat
• Repeat mode is turned off.
• Repeat the current selection.
Shuffl e
• Random play shuffl e is turned off.
• Shuffl e tracks in the current folder.
Press
Menu key
Turn Rotary
Encoder to
highlight Repeat
or Shuffl e.
Press Rotary
Encoder to change
the settings as
described below.
Menu exit. See
“Menu Key
Operation” on
page 6.
44
MS-IP700 model
Note: If you select iPod or USB input without fi rst inserting the
device, the message “Not connected” is displayed on the screen.
Before inserting iPod
To avoid damage and ensure safe operation, please read the following
information before using your iPod.
• Please ensure iPod dock connector is clean, dry and free from damage.
• Check that the unit’s iPod dock is free from obstructions.
• Insert correct sleeve combination to match your iPod (never insert iPod
without the correct sleeve).
• Ensure iPod is inserted with display facing upwards.
• Never force your iPod into the dock, if the iPod does not mate with
reasonable ease, the sleeve/iPod combination is most likely incorrect.
• Take care when removing iPod from unit as surfaces may be warm.
To insert your iPod or USB fl ash drive:
1. Press the door catch and open the control panel door.
Press the
door catch
Open