Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
604
ADDITIONAL FEATURES
8.9 ELECTRONIC CHECKLISTS
NOTE: The optional checklists presented here are for example only and may differ from checklists available
for the Phenom 100. The information described in this section is not intended to replace the checklist
information described in the POH.
NOTE: Garmin is not responsible for the content of checklists. Checklists are created by the aircraft
manufacturer. Modifications or updates to the checklists are coordinated through the aircraft manufacturer.
The user cannot edit these checklists.
TheoptionalchecklistfunctionsaredisplayedontwolevelsofsoftkeysthatareavailableonanyMFDpage.
Figure 8-129 Checklist Softkeys
CHKLIST
DCLTR
SYSTEM
MAP
The CHECK Softkey label changes to UNCHECK
when the checklist item is already checked.
EXIT
CHECK
SYSTEM EMERGCY
SHW CHRT
(Optional)
TheMFDisabletodisplayoptionalelectronicchecklistswhichallowthepilottoquicklyndtheproper
procedure on the ground and during each phase of flight. The system accesses the checklistsfromanSD card
insertedintothetopcardslotoftheMFD.IftheSDcardcontainsaninvalidchecklistleornochecklist,
the Power-up Pagemessages display‘Checklist File:Invalid’ or‘Checklist File:N/A’ (notavailable) andthe
CHKLISTSoftkeyisnotavailable.
Thefollowingcolorsareusedforchecklistitems:
• Light Blue - Items not selected or checked
• White - Item is selected
• Green - Item has been checked
• Gray - General notes
• Yellow - Caution notes
• Red - Warning notes
Accessing and navigating checklists:
1) From any page on the MFD, select the CHKLIST Softkey or turn the large FMS Knob to select the Checklist
Page.
2) Turn the large FMS Knob to select the ‘GROUP’ field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT Key.
4) Turn the large FMS Knob to select the ‘CHECKLIST’ field.
5) Turn the small FMS Knob to select the desired checklist and press the ENT Key. The selected checklist item is
indicated with white text surrounded by a white box.
6) Press the ENT Key or select the CHECK Softkey to check the selected checklist item. The line item turns green
and a checkmark is placed in the associated box. The next line item is automatically selected for checking.
Either FMS Knob can be used to scroll through the checklist and select the desired checklist item.
Press the CLR Key or select the UNCHECK Softkey to remove a check mark from an item.