GE UPGT650 Marine RADAR User Manual


 
Installation Instructions
23
For 3-wire Connection ONLY:
Be sure the dryer’s green ground wire
is connected to green ground screw on
cabinet rear.
D
For 4-wire Connection ONLY:
Remove the dryer’s ground wire from behind
the green ground screw and connect it to the
center screw of the terminal block.
Attach ground wire of power cord to the
cabinet with the green ground screw.
CONNECTING DRYER POWER CORD
(cont.)
For 3-wire and 4-wire Connection: Connect
the neutral (center line on 3-wire, white line
on 4-wire) line to the center of terminal block.
E
For 3-wire and 4-wire Connection: Tighten all
terminal block screws completely.
CONNECTING DRYER POWER CORD
(cont.)
For 3-wire and 4-wire Connection: Reinstall the
terminal block access cover.
IMPORTANT: Do not leave the access cover off.
F
G
Ground
Wire
(3-wire Connection Shown)
(4-wire Connection Shown)
(3-wire Connection Shown)
(3-wire Connection Shown)
(3-wire Connection Shown)
Power
Cord
Ground
Wire
Connect
center
screw