Filter
Top Products
Side Beam View
(only with optional-purchase QuadraBeam PLUS™ transducer)
Side Beam View is only available if you have connected a QuadraBeam™ transducer accessory and when
Transducer Select is set to QuadraBeam (see Sonar Menu Tab: Transducer Select). This view shows sonar
information from both the left and right 455 kHz beams and the 200 kHz down-looking beam in one view.
You can customize the way the sonar data is displayed in the Side Beam View to suit your personal
preferences. Depending on the layout selected from the Quad Layout Sonar X-Press™ menu (only available
on the Sonar X-Press™ menu when in Side Beam View), the display will represent the same sonar data in
one of the following three layouts: Default, Classic, and Slanted.
Default layout: The top portion of the display presents a historical log of sonar returns from the 200 kHz
down-looking sonar beam. New information in the down beam panel scrolls from right to left. The bottom
portion of the display presents a historical log of sonar returns from the 455 kHz right- and left-looking
sonar beams. New information in the side beam panels scrolls from the center out.
8
200 kHz Sonar History Window
9
Upper Depth Range
10
Lower Depth Range
11
Side Beam View, Default Layout
1
2
3 4
Depth
1
Temp:
water surface temperature
2
Speed:
speed of boat
3
Course:
the current direction the boat is traveling measured in degrees from North
4
VLT:
Voltage
5
Right Side 455 kHz Sonar History Window
6
5
Left Side 455 kHz Sonar History Window
7
6
7
9
8
10
11
Water Surface Line for 455 kHz Sonar History Windows
10
11
77
531617-1_A - 1197c_ManE.qxp 11/6/2007 4:37 AM Page 77