Filter
Top Products
VR209
13
7. Press the TUNE/ENTER control to tune to the selected channel.
Parental Lock
User code setting
1. Press and hold the PTY button (13) to access user code setting mode. “CODE: _ _ _ _”
appears on the screen indicating that the user should input the default user code.
2. Press the preset buttons labeled 1 - 6 to enter the 4-digit code (default value is “1111”).
The input is represented as “****” for privacy. If no input is made within 3 seconds, the
screen will return to SIRIUS mode.
NOTE: If the wrong code is entered, “INCORRECT” is displayed on the screen. After
three incorrect entries, the unit will return to SIRIUS mode.
3. After entering the default code, “NEW: _ _ _ _” appears on the screen indicating that the
user should enter a new code.
4. Press the preset buttons labeled 1 - 6 to enter a new the 4-digit code. If no input is made
within 10 seconds, the screen will return to radio mode.
5. After entering a new code, “CONFIRM _ _ _ _” appears on the screen indicating that the
user should re-enter the new code.
6. Press the preset buttons labeled 1 - 6 to re-enter the new the 4-digit code and confirm.
7. If the new code is correctly entered twice, “CODE SAVED” appears on the screen and the
radio returns to SIRIUS mode.
Lock a Channel
1. In Sirius mode, tune to the channel you want to lock.
2. Press and hold the MODE button (4) for 3 seconds. A beep tone is heard and the
message "Code:_ _ _ _" appears.
3. Enter your user code to lock the channel. “CH Locked” appears and the audio is muted for
this channel. When a user returns to this channel, the user code must be entered to hear
the audio.
4. If a user code is not entered within 3 seconds, the unit returns to the previous channel.
Listen to a Locked Channel
• In Sirius mode, when tuning to a locked channel, the audio output is muted and “CH
Locked” appears on the display.
• The listen to a locked channel, enter the user code when “Code:_ _ _ _” appears on the
screen.
• Using the TUNE/ENTER control, select “Access” to play the audio on the locked channel.
• If a user code is not entered within 3 seconds, the unit returns to the previous channel.
• If the wrong code is entered, “INCORRECT” is displayed on the screen. After three
incorrect entries, the unit will return to the previous channel.
Unlock Channel
To unlock a locked channel, tune to that channel and enter the user code when “Code:_ _ _ _ “
appears on the screen. Using the TUNE/ENTER control, select “UNLOCK” to release the
channel from lock for continued access. Mute for this channel will be deactivated and the
channel will remain unlocked.
NOTE: The master unlock code is “3511” and cannot be changed. This code will unlock
all locked channels. Please note this code and keep it in a safe place.