Mitsubishi HG-JR Outboard Motor User Manual


 
3. CONNECTORS USED FOR SERVO MOTOR WIRING
3 - 9
Plug Cable clamp Cable Plug Cable clamp Cable
Connector
configuration
Feature
Plug (DDK) Cable clamp (DDK) Servo motor
power supply
connector
(Note 2)
Type Model
Cabel OD
[mm] (reference)
Model
G
(for power
supply)
IP67
EN compliant
Straight
CE05-6A22-22SD-D-BSS
Applicable wire size: AWG 10 to 8
9.5 to 13 CE3057-12A-2-D
MS3102A22-22P
12.5 to 16 CE3057-12A-1-D
Angle
CE05-8A22-22SD-D-BAS
Applicable wire size: AWG 10 to 8
9.5 to 13 CE3057-12A-2-D
12.5 to 16 CE3057-12A-1-D
(Note 1)
General
environment
Straight
D/MS3106B22-22S
Applicable wire size: AWG 10 to 8
15.9 or less
(bushing ID)
D/MS3057-12A
Angle
D/MS3108B22-22S
Applicable wire size: AWG 10 to 8
Note 1. Not comply with EN.
2. The other side connector
Plug Cable clamp Cable Plug Cable clamp Cable
Backshell
Connector
configuration
Feature
Plug (DDK) Backshell Cable clamp (DDK) Servo motor
power supply
connector
(Note 2)
Type Model Model
Cabel OD
[mm] (reference)
Model
H
(for power
supply)
IP67
EN compliant
Straight
(Note 3)
CE05-6A32-17SD-D
Applicable wire size: AWG 4
CE05-32BS-S-D-OB
30 to 32.5 CE3057-24A-1-D
MS3102A32-17P
27 to 29.6 CE3057-24A-2-D
CE05-6A32-17SD-D-BSS
Applicable wire size: AWG 6 to 4
22 to 23.8 CE3057-20A-1-D
Angle
CE05-8A32-17SD-D-BAS
Applicable wire size: AWG 6 to 4
(Note 1)
General
environment
Straight
D/MS3106B32-17S
Applicable wire size: AWG 6 to 4
23.8 or less
(bushing ID)
D/MS3057-20A
Angle
D/MS3108B32-17S
Applicable wire size: AWG 6 to 4
Note 1. Not comply with EN.
2. The other side connector
3. This connector is used only when the outer diameter of the cable used for HG-JR11K1M(4) and HG-JR15K1M(4) exceeds
23.8 mm.