Mitsubishi HG-JR Outboard Motor User Manual


 
APPENDIX
App. - 28
App. 7 Crimping connector for CNP3_
CNP3B
CNP3C (Note)
CNP3A
1)2)3)4)
MR-J4W_-_B
Servo amplifier
Note. This figure shows the 3-axis servo amplifier.
No. Name Model Description
Application
1) Connector set MR-J3WCNP3-
DL
The connector set is used for connecting to the servo amplifier directly using
MR-PWS1CBL_M-_.
For CNP3A/CNP3B/CNP3C
Receptacle housing: F35FDC-04V-K
Receptacle contact: LF3F-41GF-P2.0
(JST)
Applicable wire
Wire size: 0.75 mm
2
(AWG 19) to 1.25 mm
2
(AWG 16)
Insulator OD: 1.8 mm to 2.8 mm
The crimping tool (YRF-880) is required.
Quantity: 1
For thin
wire
2) Connector set MR-J3WCNP3-
DL-20P
Quantity:
20
For thin
wire
3) Connector set MR-J3WCNP3-
D2L
The connector set is used for connecting to the servo amplifier directly
without using MR-PWS1CBL_M-_.
For CNP3A/CNP3B/CNP3C
Receptacle housing: F35FDC-04V-K
Receptacle contact: BF3F-71GF-P2.0
(JST)
Applicable wire
Wire size: 1.25 mm
2
(AWG 16) to 2.0 mm
2
(AWG 14)
Insulator OD: 2.4 mm to 3.4 mm
The crimping tool (YRF-1070) is required.
Quantity: 1
For thick
wire
4) Connector set MR-J3WCNP3-
D2L-20P
Quantity:
20
For thick
wire