Mitsubishi HG-SR Outboard Motor User Manual


 
6. HG-MR SERIES/HG-KR SERIES
6 - 9
(2) Specifications
Item Description
Mounting method Flange mounting
Mounting direction In any directions
Lubrication method
Grease lubrication (already packed)
Packed
with
50 W/100 W
200 W/400 W
1/12, 1/20
750 W
1/12
200 W/400 W
1/5
750 W
1/5, 1/20
Mobilplex 46 Exxon
Mobil
Molynoc AP2
JX Nippon Oil & Energy
Mobil Grease SP
Exxon Mobil
Output shaft rotating direction Same as the servo motor output shaft direction.
Backlash (Note 3) 60 minutes or less at reducer output shaft
Permissible load inertia moment
ratio (converted into equivalent
value on servo motor shaft)
(Note 1)
50 W/100 W/750 W: 5 times or less
200 W/400 W: 7 times or less
Maximum torque Three times of the servo motor rated torque
Maximum speed
(at servo motor shaft)
4500 r/min (permissible instantaneous speed: 5175 r/min)
IP rating (reducer area) IP44 equivalent
Reducer efficiency (Note 2) 45% to 75%
Note 1. If the above indicated value is exceeded, please contact your local sales office.
2. The reducer efficiency differs depending on the reduction ratio. Also, it changes depending on the
operating conditions such as the output torque, speed and rotation, temperature, etc. The numerical
value in the table is a typical value in the rated torque, rated speed and rotation and typical
temperature, and not a guaranteed value.
3. The backlash can be converted: 1 min = 0.0167 °