Mitsubishi HG-SR Outboard Motor User Manual


 
5. WIRING OPTION
5 - 27
5.3 Servo motor power cable
These cables are servo motor power cables for the HG-MR/HG-KR series servo motors.
The numbers in the cable length field of the table indicate the symbol filling the underline "_" in the cable
model.
Refer to section 4.2.1 for wiring.
Cable model
Cable length
IP rating Bending life Application
0.3 m 2 m 5 m 10 m
MR-PWS1CBL_M-A1-L 2 5 10 IP65 Standard Load-side lead for HG-MR/HG-KR
MR-PWS1CBL_M-A2-L 2 5 10 IP65 Standard
Opposite to load-side lead for HG-
MR/HG-KR
MR-PWS1CBL_M-A1-H 2 5 10 IP65
Long
bending life
Load-side lead for HG-MR/HG-KR
MR-PWS1CBL_M-A2-H 2 5 10 IP65
Long
bending life
Opposite to load-side lead for HG-
MR/HG-KR
MR-PWS2CBL03M-A1-L 03 IP55 Standard Load-side lead for HG-MR/HG-KR
MR-PWS2CBL03M-A2-L 03 IP55 Standard
Opposite to load-side lead for HG-
MR/HG-KR
(1) Connection of servo amplifier and servo motor
1)
Servo motor
HG-MR
HG-KR
MR-PWS1CBL_M-A2-L
MR-PWS1CBL_M-A2-H
MR-PWS2CBL03M-A2-L
1)
Servo motor
HG-MR
HG-KR
MR-PWS1CBL_M-A1-L
MR-PWS1CBL_M-A1-H
MR-PWS2CBL03M-A1-L
or
CNP3A
CNP3B
CNP3C
CNP3
(Note)
or
MR-J4 multi-axis
servo amplifier
MR-J4 1-axis
servo amplifier
Connector for CNP3 packed
with the servo amplifier
Connector for CNP3A, CNP3B and
CNP3C packed with the servo amplifier
Note. This connection is for the MR-J4 3-axis servo amplifier.
Cable model 1) Servo motor power-side connector
MR-PWS1CBL_M-A1-L
Connector: KN4FT04SJ1-R
Hood, socket insulator
Bushing, ground nut
Contact: ST-TMH-S-C1B-100-(A534G)
Crimping tool: CT170-14-TMH5B
(JAE)
U
V
W
1
2
3
4
View seen from wiring side.
MR-PWS1CBL_M-A2-L
MR-PWS1CBL_M-A1-H
MR-PWS1CBL_M-A2-H
MR-PWS2CBL03M-A1-L
Connector: KN4FT04SJ2-R
Hood, socket insulator
Bushing, ground nut
Contact: ST-TMH-S-C1B-100-(A534G)
Crimping tool: CT170-14-TMH5B
(JAE)
MR-PWS2CBL03M-A2-L