Filter
Top Products
4 / Norstar Companion basics
Modular ICS Companion Installer Guide P0992639 01
Before the base stations can be used in the United States,
UTAM codes must be obtained and entered using an
administration terminal or Norstar Remote Utilities (NRU).
Please see Software keys (U.S. only) on page 67 for more
detailed information.
Companion Portable Telephones — The portable
telephones used with your Norstar system are small,
lightweight units with fully digital performance to provide
clear voice quality. Companion portable telephones feature a
two line, 16-character, alphanumeric display. For more
information on the portable used with your MICS-XC system,
refer to the Companion Portable Telephone User Guide that is
supplied with it.
Before the portables can be used in the United States, portable
credits must be obtained. Please refer to Software keys (U.S.
only) on page 67.
Administration and Maintenance Tools — Programming
the Companion system is easily and quickly done through a
T7316 Business Series Terminal or an M7310 or M7324
Norstar set. You can assign portable telephones to the system,
check base station parameters, and enable and disable
registration using set programming.
System programming can also be performed using Norstar
Remote Utilities (NRU) software on a personal computer.
Companion Diagnostic Software allows diagnostics to be run
on the wireless system. Diagnostics can be run either locally or
remotely via a personal computer.
CallPilot 100/150 or Norstar Voice Mail — CallPilot 100/
150 replaces Norstar Voice Mail on new Modular ICS
systems.