Nortel Networks P0992639 01 SONAR User Manual


 
Troubleshooting /
107
P0992639 01 Modular ICS Companion Installer Guide
A B2 channel radio (radio 2 on port 0103 in this
case) cannot be synchronized because the B1
radio was disabled in maintenance.
Both radios belonging to the base station (on
port 0103 in this case) are disabled. The B1
radio must be operational to synchronize both
radios of the base station with other radios in
the system. Two events are raised: one for the
B1 channel radio and another for the B2
channel radio. A corresponding alarm code 53
occurs.
A radio (0103-1 in this case) cannot be
synchronized because there are no B2 channel
radios.
Both radios belonging to the base station (on
port 0103 in this case) are disabled.Two events
are raised: one for the B1 channel radio in this
case) and another for the B2 channel radio. A
corresponding alarm code 53 occurs.
A recoverable RIM fault has occurred
The RIM is reset. If a link is active when this
error occurs, the link is dropped. The radio
(0109-1 in this case) is returned to service.
An unrecoverable RIM fault has occurred
The radio (0109-1 in this case) is disabled and
taken out of service. If a link is active when this
error occurs, the link is dropped. A
corresponding alarm code 53 occurs.
The built-in self-test on the base station has
failed
The radio (0109-1 in this case) is disabled and
taken out of service. If a link is active when this
error occurs, the link is dropped. A
corresponding alarm code 53 occurs.
The base station is connected to a system that
supports a radio protocol that the ICS does not
understand.
Event message display Cause
Evt:305-01032 S5
Evt:306-01031 S5
Evt:307-0109100 S5
Evt:307-0109101 S5
Evt:307-0109102 S5
Evt:308-0103 S5