Nortel Networks P0992639 01 SONAR User Manual


 
20
/ Installation
Modular ICS Companion Installer Guide P0992639 01
RPI Requirements
Mounting the RPI unit
1. Position the screw holes for the RPI using the dimensions
shown in the following figure.
RPI mounting holes
To provide adequate ventilation and to prevent
overheating, leave a clearance of at least 125 mm (5 in.)
around the RPI.
If you are mounting two RPIs, one above the other, leave
a clearance of at least 300mm (12 in.) between them to
provide adequate ventilation and to prevent overheating.
Base stations RPI-16 and RPI-8 required PSUs required
18
1
RPI-8
1
PSU
916
1
RPI-16
2
PSUs
1724
1
RPI-16 and
1
RPI-8
3
PSUs
2532
2
RPI-16
4
PSUs
325 mm
(13 in.)
25 mm
(1 in.)
50 mm
(2 in.)
300 mm
(12 in.)
Keyholes