Nortel Networks P0992639 01 SONAR User Manual


 
Installation /
23
P0992639 01 Modular ICS Companion Installer Guide
Maximum power cabling distance (approximate)
Depending on the size of cable you are using, you should
remember the maximum cabling distances allowed between
the RPI and the base station.
RPI Connector Overview
The following illustration shows where the input and output
connectors are located on the RPI connector board.
RPI connector board
Wire size Single-pair Double-pair
0.6 mm (22 AWG) 800 m (2,500 ft.) 1200 m (4,000 ft.)
0.5 mm (24 AWG) 500 m (1,500 ft.) 1000 m (3,000 ft.)
When using two power pairs, ensure they are
connected with the same polarity.
OBIX1 OBIX2 OBIX3 OBIX4 OBIX9 OBIX10 OBIX11 OBIX12
OBIX5 OBIX6 OBIX7 OBIX8 OBIX13 OBIX14 OBIX15 OBIX16
IBIX1IBIX3IBIX2IBIX4
OBIX1 OBIX2 OBIX3 OBIX4 OBIX9 OBIX10OBIX11OBIX12
OBIX5 OBIX6 OBIX7 OBIX8 OBIX13 OBIX14OBIX15OBIX16
IBIX4 IBIX3 IBIX2 IBIX1