Installation /
43
P0992639 01 Modular ICS Companion Installer Guide
1. Mount the antenna using four screws.
2. To prevent undue stress on the co-axial cable, secure it to
the mounting surface.
3. Connect the antenna to the appropriate base station radio.
Note: The co-axial cable length must not exceed 10 m.
Installing an indoor omni-directional external antenna
(Canada)
When installing an indoor omni-directional external antenna:
• Use the bracket supplied to mount the antenna on a wall or
ceiling.
Note: Use of a bracket other than the one supplied may not
provide the necessary clearance between the floor or
wall and the antenna.
• Install the bracket so that the external antenna is vertical.
The recommended mounting height on a wall is half way
between the floor and the ceiling.