Filter
Top Products
44
/ Installation
Modular ICS Companion Installer Guide P0992639 01
Installing an indoor omni-directional external antenna (Canada)
1. Insert the antenna in the bracket so that the antenna is
vertical.
2. Mount the bracket to the wall or ceiling using two screws.
3. To prevent undue cable stress on the co-axial cable, secure
it to the mounting surface with a clamp.
4. Connect the external antenna to the appropriate base
station radio.
Note: The length of the co-axial cable must not exceed 10 m.
30 mm
Ceiling mount
installation
Wall mount
installation
30 mm
Cable
clamp
Cable
clamp
Co-axial
cable
Co-axial
cable
30 mm
C0-axial
cable
Ceiling mount
installation
Cable
clamp
Wall mount
installation
C0-axial
cable
Cable
clamp
30 mm