Nortel Networks P0992639 01 SONAR User Manual


 
46
/ Installation
Modular ICS Companion Installer Guide P0992639 01
Installing the outdoor omni-directional external antenna (Canada)
To install an outdoor omni-directional external antenna,
follow these steps:
1. Screw the antenna mounting plate vertically to the exterior
wall of the building with lag bolts or other appropriate
hardware as shown in the illustration, Installing the
outdoor omni-directional external antenna (Canada).
2. Feed one end of the co-axial cable up through the bottom
of the antenna shroud and attach the BNC connector to the
base of the mast.
3. Slide the mast down into the shroud until it fits.
Plastic plug
Connector
at the base of
the mast
Shroud
Mast
Co-axial cable to
surge protector on
interior wall
Set screw
Cable ties
Exterior wall
mounting plate
Lag bolts or other
appropriate mounting
hardware
Mast
Connector at
the base of
the mast
Shroud
Plastic plug
Cable ties
Set screw
Exterior
wall mounting
plate
Appropriate
mounting
hardware
Co-axial cable
to surge protector
on interior wall