Programming /
65
P0992639 01 Modular ICS Companion Installer Guide
Cells
Cell programming allows you to examine the cell radio and
cell neighbor configuration. Choose the cell you want to
examine by pressing ≠ and the cell number (01 to 32)
or select LIST to see all in sequence. When in the list mode,
there is a softkey that allows you to FIND a specific cell
number.
From a specific cell number, select ≠ to see all Cell
radios, Cell neighbors and Cell radio neighbors.
Cell radios
This sub-heading allows you to view the five-digit number of
any radios assigned to this cell.
For example, if radio 07012 is in the cell, the display shows
07012 asgned. Press ≠ and enter the five-digit
radio number to view the setting: Assigned or Unassigned.
Select LIST to see all in sequence. Select SCAN to go to the list
or next radio with a setting Assigned.
Cell nghbrs
This sub-heading allows you to view the two-digit number of
any cells that border a particular cell in a system. You can then
remove any of them or add more cells. Press ≠ and
enter the cell number to see the settings: Assigned or
Unassigned. Select LIST to see each neighbor in sequence.
Select SCAN to see the first/next cell Assigned.
For example cell 01, the display shows Nghbr:03 and
Nghbr:04. This means that cells 03 and 04 have been assigned
as cell neighbors.