Programming /
69
P0992639 01 Modular ICS Companion Installer Guide
Step 2: Obtain the System Identification Number
Obtain the System ID (SysID) by pressing
, or
on any programming set.
This information is also available by accessing Software
keys in an Installer programming session:
1. Place the programming overlay on an M7310, M7324, or
T7316 telephone.
2. Press . The display reads
Password:.
3. Enter the most recent Installer password. The display reads
Terminals&Sets.
4. Press ‘ until the display reads Software keys.
5. Press ≠ The display reads SysID: followed by
the unique System Identification Number.
6. Press ‘ to continue in Software keys or to
exit.
Record the Companion ID and the SysID in the Modular ICS
Programming Record.
Step 3: Call the Nortel Customer Response Center
1. To obtain your two sets of keys call the Nortel Networks
Customer Response Center at:1-800-321-2649.
2. Follow the voice prompts for Norstar products. When you
are asked for the information concerning your request,
provide the following:
• the Companion ID (on the label);
• the customer’s zip code (on the label); and
• the System ID (see Step 1).