NorthStar Navigation 978/897-6600 Marine GPS System User Manual


 
SECTION FOUR: Installing and wiring the 2701
Page 18 958 Installation Manual, Rev. A1
Figure 12: 2701 case and mounting dimensions
Connecting the 2701 to the 958
The pre-finished 958BDM-CA cable connects the 958 with the 2701. Plug the cable’s 25-pin
connector into the 2701 and the 7-pin connector into the 958 connector labelled “GPS.” If you must
remove one of the connectors, re-fabricate the cable using the wiring connections described below.
TABLE 4: Wiring connections for 2701 cable
958 connector (7-pin) 2701 connector (25-pin) Function
17GPS RX1 (Blue)
2 21 BDM RX1 (Orange)
36GPS TX1 (Green)
4 20 BDM TX1 (Brown)
5 12 Power CTL (Black or Gray)
6 13 GND (White)
7 25 Power + (Red)
6 NC Drain Wire
NC KS131 Foil Shield