Filter
Top Products
20
Northstar NS3300 Pilot
3-12-1 The alarm window
The alarm window shows a list of the latest active
alarms. The most severe alarms appear at the top
of the list.
Turn the Control Dial to stop the NS3300 Pilot
from beeping.
Select ‘Details’ to jump directly
to the Active alarms screen.
Select ‘OK’ to acknowledge the
displayed alarms.
3-12-2 Active alarms
The Active alarms screen shows a list of the
currently active alarms.
To show the Active alarms screen:
• Select ‘Details’ from the alarm
window or,
• Select ‘Active alarms’ in the
Display menu or,
• Go to Menu > Setup > Alarms >
Active alarms.
Turn the Control Dial to select
an alarm in the list and press
to see the Alarm details.
3-12-3 Alarm history
The NS3300 Pilot keeps a record of alarms. The Alarm history
screen shows a list of up to 18 recorded alarm events.
To show the Alarm history screen:
• Go to Menu > Setup > Alarms > Alarm history.
Turn the Control Dial to select an alarm in the list and
press
to see the Alarm details.
3-12-4 Alarm details
The alarm details window shows extra
detail on an individual alarm.
When keylock is activated, the NS3300 Pilot will
ignore most key presses.
• To turn keylock on:
Press and hold the
key for 2 seconds. A ‘Keys
locked’ message will appear and a small lock icon
will appear on the lower right-hand display.
3-13 Keylock
3-14 Simulate mode
If the word ‘Simulate’ flashes on the display, then
the unit is in simulate mode.
• Simulate mode allows you to become familiar
with the unit off the water.
• Simulate mode can be turned on or off: Menu
> Setup > Simulate menu.
Warning: Do not use simulate mode while at sea.
• To turn keylock off:
Press and hold the
key for 2 seconds. A ‘Keys unlocked’
message will appear and the keys are re-enabled.