Patton electronic 2094 Marine Battery User Manual


 
PATTON MODEL 2094
TABLE OF CONTENTS
Section
Page
1.0 General Information...............................................................2
1.1 Warranty Statement
1.2 Radio and TV Interference
1.3 CE Notice
1.4 Service Information
2.0 General Information............................................................5
2.1 Features
2.2 General Product Description
2.3.1 The 2094 as the Interface between the Telco and CPE
2.3.2 The 2094 as a High-Speed Short Range Modem
2.3 Supported Applications
3.0 Configuration .........................................................................7
3.1 DIP Switch Configuration
3.2 Software Configuration
3.2.1 Introduction to Main Menu
3.2.2 System Configuration
3.2.3 System Diagnostics
3.2.4 Unit Options
4.0 Installation ..........................................................................26
4.1 DTE Interface Connection
4.2 Network Interface Connection
4.3 Power Connection
4.3.1 Using The AC Power Supply (100-240VAC)
4.3.2 Supplying DC Power
4.3.3 Supplying Power via pin KK
5.0 Operation.............................................................................28
5.1 LED Descriptions
5.2 Loop (V.54 & Telco) Diagnostics
5.2.1 Operating Local Loopback (LL)
5.2.2 Operating Remote Digital Loopback (RL)
5.3 Bit Error Rate (V.52) Diagnostics
Appendix A - Specifications ........................................................33
Appendix B - Cable Recommendations .....................................34
Appendix C - Factory Replacement Parts and Accessories.......35
Appendix D - Interface Pin Assignments....................................36
Appendix E - Power Supply Interface.........................................38
1
1.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Services at (301) 975-1007.
1.1 WARRANTY STATEMENT
Patton Electronics warrants all Model 2094 components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.This war-
ranty is limited to defects in workmanship or materials, and does not
cover customer damage, abuse, or unauthorized modification. This
product contains no serviceable parts; therefore the user shall not
attempt to modify the unit in any way. If this product fails or does not
perform as warranted, your sole recourse shall be repair or replace-
ment as described above. Under no condition shall Patton
Electronics be liable for any damages incurred by the use of this prod-
uct. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product. Patton Electronics
specifically disclaims all other warranties, expressed or implied, and the
installation or use of this product shall be deemed an acceptance of
these terms by the user. In the event the user detects intermittent or
continuous product malfunction due to nearby high power transmitting
radio frequency equipment, the user is strongly advised to use only
data cables with an external outer shield bonded to a metal or metal-
ized connector.
2