Filter
Top Products
9.9 Waypoints
Placing a waypoint at the cursor position
1. Press the WPTS MOB button.
2. Move the cursor to the position on the chart where you want
the waypoint.
3. Press the WAYPOINT AT CURSOR softkey.
4. Press OK or wait 4 seconds.
Placing a waypoint at your vessel’s position
1. Press the WPTS MOB button.
2. Press the WAYPOINT AT VESSEL softkey.
3. Press OK or wait 4 seconds.
4. Alternatively, press the WPTS MOB button twice, and then press
OK.
Placing a waypoint at a known position
1. Press the WPTS MOB button.
2. Press the WAYPOINT AT LAT/LON softkey.
3. Enter the Latitude/Longitude position..
4. Press OK twice.
Hiding a waypoint on the radar display
In the radar application:
1. Press the PRESENTATION softkey.
2. Press the SHOW/HIDE WAYPOINTS softkey.
3. Press the ON RADAR softkey repeatedly until the HIDE option
is selected.
4. Press the OK button.
Displaying the waypoint list
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
120 C-Series Widescreen user reference