Filter
Top Products
14.1 Data application overview
The data application displays system and instrument data on your
multifunction display.
The data application enables you to view numeric data generated
by the system. It also shows data from instruments connected to
your multifunction display using the NMEA or SeaTalk protocols.
14.2 Pre-congured data in the data
application
By default, the data application displays a pre-congured range of
system and instrument data in a number of data ’panels’. Each
panel consists of a number of ’cells’, each containing a different
item of data.
Note: Panel selection is a local setting, and therefore only affects
the individual display that you are currently using. It does not
affect any networked displays.
List of pre-congured data panels
A range of pre-congured panels show commonly used data.
The following table shows the data displayed by each type of panel.
Each data item listed in the table below represents a ’cell’.
Note: Panel selection is a local setting, and therefore only affects
the individual display that you are currently using. It does not
affect any networked displays.
In the following table, Y=YES, N=NO.
Data
Naviga-
tion panel
Way-
point
panel
Route
panel
Fish-
ing
panel
Sail-
ing
panel
Vessel
Position
Y Y Y Y N
Active
Waypoint
Y Y Y Y N
TTG
Y N N N N
176 C-Series Widescreen user reference