Filter
Top Products
Note: To abandon a move waypoint operation, press CANCEL.
Erasing waypoints
Erasing a Waypoint Using the Cursor
In the chart or radar application:
1. Using the trackpad, position the cursor over the waypoint you
want to erase.
The softkeys change to provide waypoint-related functions.
2. Press the ERASE WAYPOINT softkey.
3. Press the YES softkey to conrm.
4. Press the OK button.
Note: If a route is hidden, its waypoints can still be displayed. If
you attempt to erase a waypoint from a hidden route, a warning is
displayed.
Erasing a waypoint using the waypoint list
In the chart or radar application:
1. Press the WPTS/MOB button.
2. Press the REVIEW AND EDIT WAYPOINTS softkey.
3. Using the trackpad, highlight the waypoint you want to erase.
4. Press the ERASE WAYPOINT softkey
5. Press the YES softkey to conrm.
6. Press the OK button.
Note: If a route is hidden, its waypoints can still be displayed. If
you attempt to erase a waypoint from a hidden route, a warning is
displayed.
Erasing all waypoints
In the chart or radar application:
1. Press the DATA button.
2. Press the ARCHIVE AND TRANSFER softkey.
3. Press the ERASE FROM DISPLAY softkey.
4. Press the SELECT LIST softkey until the WPT option is selected.
The System Waypoint List is displayed.
5. Press the ERASE ALL WAYPOINTS softkey.
6. Press the YES softkey to conrm.
Note: If a route is hidden, its waypoints can still be displayed. If
you attempt to erase a waypoint from a hidden route, a warning is
displayed.
Using waypoints
45