Filter
Top Products
Note: If the current destination is the last waypoint, the chart
advances on to the rst waypoint in the route.
Resetting Cross Track Error (XTE)
While following a route in the chart application:
1. Press the RESTART XTE softkey.
Editing a route
Once you have created a route, it can be edited in a variety of ways.
You can:
• Reverse a route.
• Amend the course of a route (although you cannot edit a target
waypoint that you are currently navigating to).
• Change the name or color of a route.
• Erase a route.
Note: An active route can be edited, with the exception of the
target waypoint. If a waypoint being edited becomes the target,
then the system shall cancel the edit; the waypoint shall remain in
its original position.
Changing the name or color of a route
In the chart application:
1. Press the NAVIGATION OPTIONS softkey.
2. Press the ROUTES softkey.
3. Press the REVIEW AND EDIT ROUTES softkey.
4. Using the trackpad, highlight the required route from the list.
5. Press the EDIT NAME AND COLOR softkey.
6. Using the trackpad, select the Name or Color eld.
7. Press the EDIT NAME or EDIT COLOR softkey, as appropriate.
8. Using the trackpad, select the new name of color for the route.
9. Press the OK button to save the changes.
Note: If the route you are editing has been saved by pressing
the FOLLOW (QUICK) ROUTE softkey, the route is named
“Quick Route” by default. Changing its name prevents it being
overwritten the next time the FOLLOW (QUICK) ROUTE softkey
is used.
Adjusting the thickness of route lines
In the chart application:
1. Press the MENU button.
2. Using the trackpad, select the Chart Setup option.
3. Using the trackpad, select the Route Width menu item.
4. Using the trackpad, select the appropriate route line thickness.
5. Press the OK button.
Showing or hiding a route
In the chart application:
1. Using the trackpad, position the cursor over the appropriate
route.
2. Press the HIDE ROUTE softkey.
Moving a waypoint within a route
In the chart application:
1. Using the trackpad, move the cursor over the waypoint you want
to move.
2. Press the MOVE WAYPOINT softkey.
3. Using the trackpad, move the cursor so that it stretches the leg
of the route to the desired position on the chart.
80 C-Series Widescreen user reference