Filter
Top Products
Radar Operation Manual Page 27
Figure 4.2.1 - Gain Adjustment
NOTE (EXCEPT CP180/CP180i)
The Gain can be also controlled by pressing [GAIN] directly from the Radar page, after pressing any
Soft Keys.
4.2.2 Sea Clutter
Reduces the effects of the sea clutter that can adversely affect displayed targets. To select
the Sea Clutter value, follow this procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
SENSITIVITY and press [ENT].
2. Move the ShuttlePoint knob to highlight
SEA CLUTTER and press [ENT].
3. Move the ShuttlePoint knob up/down to insert the desired value and left/right to move the
cursor. When finished, press [ENT].
Figure 4.2.2 - Sea Clutter
NOTE (EXCEPT CP180/CP180i)
The Sea Clutter can be also controlled by pressing [SEA] directly from the Radar page, after
pressing any Soft Keys.