Filter
Top Products
Phantom PS1000Page 28
10.12.3 Priority Scanning
(
P-SCAN
)
The Phantom PS1000 is set to Channel 16 as the priority channel.
1. Set the squelch level to the “squelch threshold” (the background noise is
disappeared).
2. Select a desired channel to be scanned using the
[
]
or
[
]
key, then press and hold the
[
SCAN
]
key. “MEM” will appear
on the LCD which indicates the channel has been pro-
grammed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
]
key, “MEM” will disappear in the LCD.
5. To start priority scanning, press the
[
SCAN
]
key momantarily
(“P-SCAN” appears on the LCD). Scanning will proceed be-
tween the memorized channels and the priority channel. CH
16 the priority channel will be scanned after each pro-
grammed channel.
6. To stop scanning, press the
[
SCAN
]
,
[
CALL
(
SET
)
MENU
]
,
[
WX
]
,
[
16/9
]
,
[
DIS-
TRESS
]
, or PTT key.
: When DSC Scanning method is enabled. The DSC scan is ON in default.
NOTE
Triple watch (T/W) means the radio is watching CH70 for DSC Calls.
Dual watch (D/W) means the radio is not watching CH70 for DSC Calls.
MEM CH. CH. 16 CH. 70
MEM CH.
CH. 16 CH. 70