Yamaha 130A Outboard Motor User Manual


 
4-24
E
5) With the outboard motor in an vertical
position, using a flexible or pressurized
filling device, inject outboard motor
hypoid gear oil (SAE 90) into the oil
drain plug hole.
6) When oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7) Insert and tighten in the oil drain plug.
EML24010
INSPECTING AND REPLACING
ANODE
Yamaha outboard motor is protected from
corrosion by sacrificial anode.
Check the anode periodically. Remove the
scales from surfaces of the anode.
For the replacement of the anode, consult a
Yamaha dealer.
cC
Do not paint the anode, for this would
render it ineffective.
601033
603024
405016
Gear oil capacity:
Refer to “SPECIFICATIONS”, Page 4-1.
64C-9-16-4 4/18/01 11:41 AM Page 93