Yamaha 150A Outboard Motor User Manual


 
4-10
E
Carburetor Cleaning 1 1 1
Fuel filter Cleaning 4-14
Fuel system Inspection 4-13
Fuel tank *2 Cleaning
Throttle link Inspection/Adjustment 1
Idling speed Inspection/Adjustment 4-15
Spark plug
Cleaning/Adjustment/
4-11
Replacement
Oil tank water drain Cleaning 4-16
Oil pump Inspection/Adjustment 1
Power trim and tilt system *1
Inspection 4-20
Wiring & Connector Inspection/Reconnect 4-17
Exhaust leakage Inspection 4-17
Water leakage Inspection 4-17
Grease points Greasing 4-18
Gear oil Change 4-23
Bolts & Nuts Retightening 4-29
Cowling clamp Inspection
Anode Inspection 4-24
Propeller Inspection 4-21
Motor exterior Inspection 4-29
Cooling water passages *3
Cleaning 4-6, 4-29
Battery Inspection
(every 1
4-25
month)
Interval
Item
Initial Every
Refer
page
10 hours
50 hours
(3 months)
100 hours
(6 months)
200 hours
(1 year)
EMK30114*
MAINTENANCE CHART
Frequency of maintenance operations may be adjusted according to the operating con-
ditions, but the following table gives general guidelines.
The mark () indicates the check-ups which you may carry out yourself.
The mark (1) indicates work to be carried out by your Yamaha dealer.
*1. for Power trim/tilt
*2. If a partable fuel tank is equipped.
*3. When operating in salt water, turbid or muddy water, the engine should be flushed with clean
water after each use.
64C-9-16-4 4/18/01 11:41 AM Page 79