Filter
Top Products
E
3-6
203016
q
w
EMF40110
PRE-OPERATION CHECKS
w
If any item in the pre-operation check is
not working properly, have it inspected
and repaired before operating the out-
board motor. Otherwise, an accident
could occur.
Fuel
Check to be sure you have plenty of fuel
for your trip. Make sure there are no fuel
leaks or gasoline fumes.
Be sure the fuel hose is not being flat-
tened or kinked by objects in the boat,
and that there are no sharp objects near
it.
Oil
Check to be sure you have plenty of oil for
your trip.
Controls
Check throttle, shift, and steering for
proper operation before starting the
engine.
The controls should work smoothly, with-
out binding or unusual free play. Look for
loose or damaged connections.
Check operation of the starter and stop
switches when the outboard moter is in
the water.
3) Slowly fill the engine oil into the
engine oil tank.
4) After filling, replace the all caps
securely.
1 Oil filler access cap
2 Oil tank filler cap
6H3-9-1M 3 3/11/02 9:05 PM Page 7