Filter
Top Products
Operation
32
4. Slightly tilt the outboard motor up. The
tilt support bar will lock automatically,
supporting the outboard motor in a par-
tially raised position.
NOTE:
This outboard motor has 2 positions for shal-
low water cruising.
5. To return the outboard motor to the nor-
mal running position, place the tilt lock
lever and shallow water lever to the lock
position.
6. Slightly tilt the outboard motor up until
the tilt support bar automatically returns
to the free position.
7. Slowly lower the outboard motor to the
normal position.
EMU28190
Cruising in other conditions
Cruising in salt water
After operating in salt water, wash out the
cooling water passages with fresh water to
prevent them from becoming clogged with
salt deposits.
NOTE:
For cooling system flushing instructions, see
page 33.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
if you use the outboard motor in turbid (mud-
dy) water conditions.
ZMU03728
ZMU03729
ZMU03731