Yamaha 9.9 15 Outboard Motor User Manual


 
Components
22
EMU26373
Cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock the
cowling again by returning the cowling lock le-
ver(s) to the lock position.
EMU26430
Carrying handle
A carrying handle is included on the clamp
bracket. After setting the handle up, it enables
you to carry the outboard motor easily with
one hand.
To set up the carrying handle, proceed as fol-
lows:
1. Place the tilt lock lever in the lock posi-
tion.
2. Securely hook the arm on the carrying
handle end to the clamp bracket bar.
NOTICE
ECM00080
Place the tilt lock lever in the lock position
while using the carrying handle. Other-
wise, the lower unit could fall to the
ground while carrying the motor.
1. Cowling lock lever(s)
1. Carrying handle
2. Clamp bracket bar
U63V1EE0.book Page 22 Tuesday, March 3, 2009 10:50 AM