Yamaha 9.9 15 Outboard Motor User Manual


 
Operation
40
4. To return the outboard motor to the nor-
mal running position, place the gear shift
lever in neutral.
5. Place the tilt lock lever in the lock/down
position, then slightly tilt the outboard mo-
tor up until the tilt support bar automati-
cally returns to the free position.
6. Slowly lower the outboard motor to the
normal position.
EMU28195
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter.
Cruising in muddy, turbid, or acidic water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(see page 15) if you use the outboard motor in
acidic water or water with a lot of sediment in
it, such as muddy or turbid (cloudy) water. Af-
ter operating in such water, flush the cooling
passages with fresh water to prevent corro-
sion. Also rinse the outside of the outboard
motor with fresh water.
ZMU02048
U63V1EE0.book Page 40 Tuesday, March 3, 2009 10:50 AM