Filter
Top Products
E
5-7
208014
EMR00001
4) To start the engine with emergency
starter rope, insert the knotted end of
the rope into the notch in the flywheel
rotor and wind the rope several turns
clockwise. Then, give a strong pull
straight out to crank the engine.
Repeat if necessary.
208012
407021**
301012
3) Prepare the engine for starting. See
"STARTING ENGINE" for procedures.
Be sure the engine is in Neutral and
that the lanyard is attached to the
engine stop switch.
On the electric start model the main
switch must be on if the main switch
is equipped.
2) Remove the starter/flywheel cover by
removing the bolts.
NOTE:
On a model equipped with the start-in-
gear protection device (cable), disconnect
the cable from the starter.
Procedure
1) Remove the top cowling.
63V-9-14-5 4/25/01 2:12 PM Page 8