Filter
Top Products
2-17
E
EMU00147
Fuel Flow Meter
The meter displays fuel flow within one hour,
at the rate of current engine operation.
If twin engines are installed on your boat,
the meter will display total fuel flow of Port
and Starboard side engine. It also displays
PS indication at the same time.
By pressing “set” button, the meter will dis-
play fuel flow of starboard side engine and S
indication.
By pressing “set” button again, the meter will
display fuel flow of port side engine and P
indication.
By pressing “set” button again, the meter will
display total fuel flow.
NOTE:
@
●
The meter displays gallon/hour and liter
depending upon operator preference.
Select the desired unit of measurement
by setting the selector switch
1
on the
back of the meter during installation.
●
Fuel consumption meter and Fuel econ-
omy meter will indicate same unit of mea-
surement.
@
EMU01276
Fuel Consumption Meter
This meter displays the total amount of fuel
consumed since the meter was last reset.
Repeatedly push and release the “mode”
button until the indicator on the face of the
meter points to total (“TTL”). To reset the
total fuel consumption to “0”, press the “set”
and “mode” buttons together.
E_69J10.book Page 17 Monday, May 28, 2001 9:52 AM