Filter
Top Products
4-5
E
EMU00335
Filling Fuel Tank
Fill the fuel tank with fresh fuel and add one
ounce of “Yamaha Fuel Conditioner and Sta-
bilizer” (Part No. LUB-FUELC-12-00) to
each gallon of fuel.
NOTE:
@
The use of “Yamaha Fuel Conditioner and
Stabilizer” eliminates the need to drain the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
@
EMU00338
Flushing Cooling System and Fogging
Engine
Cooling system flushing is essential to pre-
vent the cooling system from clogging up
with salt, sand, or dirt. In addition, fogging of
the engine is mandatory to prevent expen-
sive engine damage due to rust. Perform the
flushing and fogging at the same time.
WARNING
@
●
Do not touch or remove electrical parts
when starting or during operation.
●
Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
@
EMU00342
●
Flushing with the Flushing Attachment
CAUTION:
@
Avoid running the outboard at high
speed while on the flushing attachment,
or overheating could occur.
@
1) Remove the top cowling and the propel-
ler.
2) Install a flushing attachment
1
to the
cooling water inlet.
E_69J10.book Page 5 Monday, May 28, 2001 9:52 AM