Yamaha F6A Outboard Motor User Manual


 
4-31
E
EMU01279¯
Connecting the Battery
WARNING
@
Mount the battery holder securely in a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install a fully charged
battery in the holder.
@
CAUTION:
@
Make sure the main switch (on applica-
ble models) is OFF before working
on the battery.
Reversal of the battery leads will dam-
age the rectifier.
Connect the RED lead first when
installing the battery and disconnect
the RED lead last when removing it.
Otherwise, the electrical system can
be damaged.
The electrical contacts of the battery
and cables must be clean and properly
connected, or the battery will not start
the engine.
@
Connect the RED lead to the POSITIVE (+)
terminal first.
Then connect the BLACK lead to the NEGA-
TIVE (-) terminal.
1
Red lead
2
Black lead
3
Battery
EMU01280
Disconnecting the Battery
Disconnect the BLACK lead from the NEGA-
TIVE (-) terminal first. Then disconnect the
RED lead from the POSITIVE (+) terminal.
U68T13.book Page 31 Wednesday, August 8, 2001 12:37 PM