Yamaha F6A Outboard Motor User Manual


 
5-6
E
EMU00950¯
Emergency Starting Engine
1) Remove the top cowling.
2) Remove the start-in-gear protection
cable from the starter if equipped it.
3) Remove the starter/flywheel cover after
removing the bolt(s).
4) Prepare the engine for starting. See
STARTING ENGINE for procedures.
Be sure the engine is in Neutral and that
the lock plate is attached to the engine
stop lanyard switch. The main switch
must be ON if equipped it.
U68T13.book Page 6 Wednesday, August 8, 2001 12:37 PM