3-11
E
EMU01366¯
Manual Start Model
7) Pull out the choke knob completely.
NOTE:
@
It is not necessary to use the choke when
restarting a warm engine.
@
8) Pull the starter handle slowly until you
feel resistance. Then give a strong pull
straight out to crank and start the
engine. Repeat if necessary.
9) After the engine starts, return the starter
handle slowly to the original position
before releasing it.
NOTE:
@
If the engine doesn’t start on the first try,
repeat the procedure. If the engine fails to
start after 4 or 5 tries, open the throttle a
small amount (between 1/8 and 1/4) and try
again. If the engine still fails to start, refer to
“Troubleshooting” in Chapter 5.
@
U68T13.book Page 11 Wednesday, August 8, 2001 12:37 PM